Whether you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article content, we will discover how to adjust the low beam lights of your Nissan Rogue? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Rogue.
Why adjust the low beam lights of your Nissan Rogue?
So let’s start our article content with the interest of adjusting the low beam lights of your Nissan Rogue. For most of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Nissan Rogue are not lighting up well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Nissan Rogue for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Nissan Rogue must be done for a elementary security purpose. Regardless whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Rogue for law motives
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Rogue?
We will now move on to the section that interests you the more in this article content, how to adjust the low beams of his Nissan Rogue? This setting may seem a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Nissan Rogue
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Rogue
Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Nissan Rogue (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Nissan Rogue is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Nissan Rogue, please go through our article content on this subject.
If you need more tutorials on the Nissan Rogue, go to our Nissan Rogue category.
