Regardless you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may look easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this simple manipulation, and in this document, we will see how to adjust the low beam lights of your Nissan NV? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan NV.
Why adjust the low beam lights of your Nissan NV?
So let’s commence our document with the advantage of adjusting the low beam lights of your Nissan NV. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Nissan NV are not illuminating well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Nissan NV for security is a good option.
To begin, the adjusting of the dipped headlights of an Nissan NV must be done for a elementary security purpose. Whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Nissan NV for legal reasons
Additionally to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan NV?
We will now move on to the section that concerns you the more in this document, how to adjust the low beams of his Nissan NV? This setting may appear to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Nissan NV
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan NV
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Nissan NV (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Nissan NV is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan NV, please browse our document on this subject.
If perhaps you have any further questions about the Nissan NV, do not hesitate to consult our Nissan NV category.
