Regardless you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may look easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this content page, we will find out how to adjust the low beam lights of your Nissan Navara? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Navara.
Why set the low beam lights of your Nissan Navara?
So let’s commence our content page with the interest of adjusting the low beam lights of your Nissan Navara. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and examining this setting, either because the low beams of your Nissan Navara are not lighting up well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Nissan Navara for safety is a good plan.
To begin, the adjusting of the dipped headlights of an Nissan Navara must be done for a elementary safety purpose. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Navara for law justifications
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Navara?
We will now go forward to the section that interests you the most in this content page, how to adjust the low beams of his Nissan Navara? This setting may seem to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Nissan Navara
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Navara
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Navara (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Nissan Navara is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan Navara, please read our content page on this subject.
If you want more tutorials on the Nissan Navara, go to our Nissan Navara category.
