It doesn’t matter if you feel you can’t see properly through the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may look easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this ordinary manipulation, and in this article content, we will see how to adjust the low beam lights of your Nissan Micra 4? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Micra 4.
Why adjust the low beam lights of your Nissan Micra 4?
So let’s start our article content with the benefit of adjusting the low beam lights of your Nissan Micra 4. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Nissan Micra 4 are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Nissan Micra 4 for safety is a good plan.
First of all, the adjusting of the dipped headlights of an Nissan Micra 4 must be done for a elementary safety purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Micra 4 for legal justifications
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Micra 4?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Nissan Micra 4? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Nissan Micra 4
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Micra 4
Once your vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Nissan Micra 4 (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Nissan Micra 4 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Nissan Micra 4, please go through our article content on this subject.
To discover more tips on the Nissan Micra 4, take a look at the Nissan Micra 4 category.
