Whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Despite the fact this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic manipulation, and in this content page, we will see how to adjust the low beam lights of your Nissan Micra 2? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Micra 2.
Why set the low beam lights of your Nissan Micra 2?
So let’s start our content page with the interest of adjusting the low beam lights of your Nissan Micra 2. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking this setting, either because the low beams of your Nissan Micra 2 are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Nissan Micra 2 for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Nissan Micra 2 must be done for a ordinary security cause. Whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Nissan Micra 2 for law motives
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Micra 2?
We will now go forward to the section that interests you the most in this content page, how to adjust the low beams of his Nissan Micra 2? This setting may sound a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Nissan Micra 2
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Micra 2
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Nissan Micra 2 (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Nissan Micra 2 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan Micra 2, please browse our content page on this subject.
To get more tips on the Nissan Micra 2, take a look at the Nissan Micra 2 category.
