Whether you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Nissan Juke? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Juke.
Why adjust the low beam lights of your Nissan Juke?
So let’s begin our article with the interest of adjusting the low beam lights of your Nissan Juke. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and checking this setting, either because the low beams of your Nissan Juke are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Nissan Juke for security is a good option.
Firstly, the adjusting of the dipped headlights of an Nissan Juke must be done for a elementary security cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Juke for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Juke?
We will now move on to the part that interests you the more in this article, how to adjust the low beams of his Nissan Juke? This setting may appear a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Nissan Juke
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
The setting of the low beam headlights of his Nissan Juke
Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Nissan Juke (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Nissan Juke is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
If you want to adjust the fog lights on your Nissan Juke, please examine our article on this subject.
If you wish more tutorials on the Nissan Juke, go to our Nissan Juke category.