Regardless you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary manipulation, and in this content page, we will see how to adjust the low beam lights of your Nissan Frontier? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Frontier.
Why set the low beam lights of your Nissan Frontier?
So let’s begin our content page with the advantage of adjusting the low beam lights of your Nissan Frontier. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Nissan Frontier are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Nissan Frontier for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Nissan Frontier must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Nissan Frontier for law motives
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Frontier?
We will now go forward to the section that interests you the most in this content page, how to adjust the low beams of his Nissan Frontier? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Nissan Frontier
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Frontier
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Frontier (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Nissan Frontier is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Nissan Frontier, please browse our content page on this subject.
If you need more tutorials on the Nissan Frontier, go to our Nissan Frontier category.
