Regardless whether you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Even though this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic modification, and in this article content, we will find out how to adjust the low beam lights of your Nissan Cabstar? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Cabstar.
Why set the low beam lights of your Nissan Cabstar?
So let’s commence our article content with the benefit of adjusting the low beam lights of your Nissan Cabstar. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not always the case and checking this setting, either because the low beams of your Nissan Cabstar are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Nissan Cabstar for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Nissan Cabstar must be done for a basic security reason. Regardless whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Nissan Cabstar for law reasons
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Cabstar?
We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Nissan Cabstar? This setting may seem a bit difficult, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Nissan Cabstar
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Cabstar
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Cabstar (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Nissan Cabstar is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan Cabstar, please browse our article content on this subject.
If you have any further questions about the Nissan Cabstar, do not hesitate to consult our Nissan Cabstar category.
