Regardless you feel you can’t see good enough during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple realignment, and in this article content, we will find out how to adjust the low beam lights of your Nissan Altima? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Nissan Altima.
Why adjust the low beam lights of your Nissan Altima?
So let’s commence our article content with the advantage of adjusting the low beam lights of your Nissan Altima. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not necessarily the case and checking out this setting, either because the low beams of your Nissan Altima are not illuminating well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Nissan Altima for security is a good plan.
To begin, the adjusting of the dipped headlights of an Nissan Altima must be done for a basic security purpose. Regardless whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Nissan Altima for legal motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Nissan Altima?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Nissan Altima? This setting may seem a bit complex, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Nissan Altima
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Nissan Altima
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Nissan Altima (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Nissan Altima is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Nissan Altima, please go through our article content on this subject.
To discover more tips on the Nissan Altima, take a look at the Nissan Altima category.
