Regardless whether you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary modification, and in this content page, we will find out how to adjust the low beam lights of your Mitsubishi Space star 2? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mitsubishi Space star 2.
Why adjust the low beam lights of your Mitsubishi Space star 2?
So let’s begin our content page with the point of adjusting the low beam lights of your Mitsubishi Space star 2. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Mitsubishi Space star 2 are not lighting up well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Mitsubishi Space star 2 for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Mitsubishi Space star 2 must be done for a basic security purpose. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mitsubishi Space star 2 for legal justifications
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mitsubishi Space star 2?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Mitsubishi Space star 2? This setting may appear a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Mitsubishi Space star 2
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mitsubishi Space star 2
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mitsubishi Space star 2 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Mitsubishi Space star 2 is consistent on the road, do not hesitate to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mitsubishi Space star 2, please examine our content page on this subject.
To get more tips on the Mitsubishi Space star 2, take a look at the Mitsubishi Space star 2 category.
