Regardless whether you feel you can’t see good enough after dark, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic modification, and in this content, we will discover how to adjust the low beam lights of your Mitsubishi Lancer? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mitsubishi Lancer.
Why set the low beam lights of your Mitsubishi Lancer?
So let’s start our content with the benefit of adjusting the low beam lights of your Mitsubishi Lancer. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Mitsubishi Lancer are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Mitsubishi Lancer for security is a wise decision.
To start, the adjusting of the dipped headlights of an Mitsubishi Lancer must be done for a simple security purpose. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mitsubishi Lancer for law justifications
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mitsubishi Lancer?
We will now move on to the section that concerns you the most in this content, how to adjust the low beams of his Mitsubishi Lancer? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Mitsubishi Lancer
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mitsubishi Lancer
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mitsubishi Lancer (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Mitsubishi Lancer is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mitsubishi Lancer, please go through our content on this subject.
If you wish more guides on the Mitsubishi Lancer, go to our Mitsubishi Lancer category.
