Whether you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this simple realignment, and in this article content, we will find out how to adjust the low beam lights of your Mini Mini? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mini Mini.
Why adjust the low beam lights of your Mini Mini?
So let’s begin our article content with the advantage of adjusting the low beam lights of your Mini Mini. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking this setting, either because the low beams of your Mini Mini are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Mini Mini for security is a good option.
First of all, the adjusting of the dipped headlights of an Mini Mini must be done for a simple security cause. Regardless it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mini Mini for law motives
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mini Mini?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Mini Mini? This setting may sound a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Mini Mini
Firstly, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mini Mini
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mini Mini (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Mini Mini is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mini Mini, please examine our article content on this subject.
To get more tips on the Mini Mini, take a look at the Mini Mini category.
