Regardless you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple manipulation, and in this article content, we will discover how to adjust the low beam lights of your Mini Mini 3? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mini Mini 3.
Why adjust the low beam lights of your Mini Mini 3?
So let’s commence our article content with the advantage of adjusting the low beam lights of your Mini Mini 3. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking this setting, either because the low beams of your Mini Mini 3 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Mini Mini 3 for safety is a good plan.
To start, the adjusting of the dipped headlights of an Mini Mini 3 must be done for a simple safety purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mini Mini 3 for legal justifications
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mini Mini 3?
We will now go forward to the part that interests you the most in this article content, how to adjust the low beams of his Mini Mini 3? This setting may seem to be a bit complicated, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Mini Mini 3
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mini Mini 3
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mini Mini 3 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Mini Mini 3 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mini Mini 3, please go through our article content on this subject.
If you need more tutorials on the Mini Mini 3, go to our Mini Mini 3 category.
