Regardless you feel you can’t see as well at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic realignment, and in this document, we will find out how to adjust the low beam lights of your Mercedes Vito? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Vito.
Why adjust the low beam lights of your Mercedes Vito?
So let’s begin our document with the interest of adjusting the low beam lights of your Mercedes Vito. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and examining this setting, either because the low beams of your Mercedes Vito are not illuminating well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Mercedes Vito for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Mercedes Vito must be done for a elementary safety reason. Whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Vito for legal motives
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Vito?
We will now go forward to the part that interests you the more in this document, how to adjust the low beams of his Mercedes Vito? This setting may appear a bit difficult, but if you stick to the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Vito
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Vito
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Vito (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Mercedes Vito is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Vito, please examine our document on this subject.
To discover more tips on the Mercedes Vito, take a look at the Mercedes Vito category.
