It doesn’t matter if you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this ordinary realignment, and in this article, we will see how to adjust the low beam lights of your Mercedes Sprinter? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Sprinter.
Why set the low beam lights of your Mercedes Sprinter?
So let’s commence our article with the advantage of adjusting the low beam lights of your Mercedes Sprinter. For most people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and verifying this setting, either because the low beams of your Mercedes Sprinter are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Mercedes Sprinter for security is a good option.
First of all, the adjusting of the dipped headlights of an Mercedes Sprinter must be done for a elementary security cause. Whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Sprinter for legal justifications
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Sprinter?
We will now move on to the section that concerns you the more in this article, how to adjust the low beams of his Mercedes Sprinter? This setting may appear a bit complex, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Mercedes Sprinter
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Sprinter
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Sprinter (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Mercedes Sprinter is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Mercedes Sprinter, please go through our article on this subject.
If you want more guides on the Mercedes Sprinter, go to our Mercedes Sprinter category.
