Whether you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary manipulation, and in this content, we will discover how to adjust the low beam lights of your Mercedes Gla? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Gla.
Why set the low beam lights of your Mercedes Gla?
So let’s start our content with the interest of adjusting the low beam lights of your Mercedes Gla. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not necessarily the case and examining this setting, either because the low beams of your Mercedes Gla are not lighting up well, or because you have the sense that they are too low or too strong is a good plan .
Adjusting the low beam of your Mercedes Gla for security is a good plan.
To begin, the adjusting of the dipped headlights of an Mercedes Gla must be done for a elementary security reason. Regardless whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Gla for law motives
Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Gla?
We will now go forward to the part that concerns you the more in this content, how to adjust the low beams of his Mercedes Gla? This setting may appear to be a bit complicated, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Mercedes Gla
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Gla
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Gla (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Mercedes Gla is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Gla, please browse our content on this subject.
If perhaps you have any additional questions about the Mercedes Gla, do not hesitate to consult our Mercedes Gla category.
