Regardless whether you feel you can’t see as well through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Mercedes Classe Glc? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe Glc.
Why adjust the low beam lights of your Mercedes Classe Glc?
So let’s commence our article with the advantage of adjusting the low beam lights of your Mercedes Classe Glc. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and verifying this setting, either because the low beams of your Mercedes Classe Glc are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Mercedes Classe Glc for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Mercedes Classe Glc must be done for a simple security purpose. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe Glc for legal justifications
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe Glc?
We will now move on to the part that interests you the more in this article, how to adjust the low beams of his Mercedes Classe Glc? This setting may seem to be a bit complicated, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Mercedes Classe Glc
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe Glc
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe Glc (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Mercedes Classe Glc is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes Classe Glc, please examine our article on this subject.
If you wish more guides on the Mercedes Classe Glc, go to our Mercedes Classe Glc category.
