Whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this correction may seem to be easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary modification, and in this content, we will find out how to adjust the low beam lights of your Mercedes Classe E 5? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe E 5.
Why adjust the low beam lights of your Mercedes Classe E 5?
So let’s start our content with the benefit of adjusting the low beam lights of your Mercedes Classe E 5. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your Mercedes Classe E 5 are not lighting up well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Mercedes Classe E 5 for security is a good idea.
First of all, the adjusting of the dipped headlights of an Mercedes Classe E 5 must be done for a ordinary security cause. Whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe E 5 for law reasons
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe E 5?
We will now move on to the section that concerns you the most in this content, how to adjust the low beams of his Mercedes Classe E 5? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Classe E 5
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe E 5
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe E 5 (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Mercedes Classe E 5 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Classe E 5, please go through our content on this subject.
If perhaps you have any additional questions about the Mercedes Classe E 5, do not hesitate to consult our Mercedes Classe E 5 category.
