Regardless whether you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common realignment, and in this document, we will discover how to adjust the low beam lights of your Mercedes Classe Cls? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe Cls.
Why set the low beam lights of your Mercedes Classe Cls?
So let’s begin our document with the point of adjusting the low beam lights of your Mercedes Classe Cls. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Mercedes Classe Cls are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Mercedes Classe Cls for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Mercedes Classe Cls must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe Cls for law motives
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe Cls?
We will now move on to the section that interests you the more in this document, how to adjust the low beams of his Mercedes Classe Cls? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Classe Cls
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe Cls
Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe Cls (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Mercedes Classe Cls is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mercedes Classe Cls, please read our document on this subject.
To discover more tips on the Mercedes Classe Cls, take a look at the Mercedes Classe Cls category.