Regardless you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this adjustment may seem to be easy thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this basic manipulation, and in this article, we will find out how to adjust the low beam lights of your Mercedes Classe C 4? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe C 4.
Why set the low beam lights of your Mercedes Classe C 4?
So let’s begin our article with the benefit of adjusting the low beam lights of your Mercedes Classe C 4. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Mercedes Classe C 4 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Mercedes Classe C 4 for safety is a good plan.
To begin, the adjusting of the dipped headlights of an Mercedes Classe C 4 must be done for a basic safety cause. Whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Classe C 4 for law reasons
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Classe C 4?
We will now move on to the section that interests you the more in this article, how to adjust the low beams of his Mercedes Classe C 4? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Classe C 4
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Classe C 4
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe C 4 (they are generally marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, verify that the low beam setting of your Mercedes Classe C 4 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Mercedes Classe C 4, please examine our article on this subject.
To discover more tips on the Mercedes Classe C 4, take a look at the Mercedes Classe C 4 category.
