Regardless you feel you can’t see properly after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your motor vehicle to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this basic realignment, and in this article content, we will find out how to adjust the low beam lights of your Mercedes Classe C 3? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe C 3.

set-low-beam-headlights-mercedes-classe-c-3

Why adjust the low beam lights of your Mercedes Classe C 3?

So let’s commence our article content with the point of adjusting the low beam lights of your Mercedes Classe C 3. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Mercedes Classe C 3 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Mercedes Classe C 3 for safety is a wise decision.

To begin, the adjusting of the dipped headlights of an Mercedes Classe C 3 must be done for a basic safety reason. Whether it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Mercedes Classe C 3 for law justifications

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mercedes Classe C 3?

We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his Mercedes Classe C 3? This setting may seem a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Mercedes Classe C 3

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mercedes Classe C 3

Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe C 3 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the low beam setting of your Mercedes Classe C 3 is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Mercedes Classe C 3, please read our article content on this subject.

To find more tips on the Mercedes Classe C 3, take a look at the Mercedes Classe C 3 category.