Regardless you feel you can’t see as well during the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Although this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common manipulation, and in this content, we will discover how to adjust the low beam lights of your Mercedes Classe C 2? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe C 2.

set-low-beam-headlights-mercedes-classe-c-2

Why adjust the low beam lights of your Mercedes Classe C 2?

So let’s commence our content with the advantage of adjusting the low beam lights of your Mercedes Classe C 2. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and examining this setting, either because the low beams of your Mercedes Classe C 2 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good idea .

Adjusting the low beam of your Mercedes Classe C 2 for safety is a good idea.

First of all, the adjusting of the dipped headlights of an Mercedes Classe C 2 must be done for a basic safety cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Mercedes Classe C 2 for legal reasons

Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mercedes Classe C 2?

We will now go forward to the section that interests you the most in this content, how to adjust the low beams of his Mercedes Classe C 2? This setting may seem a bit complex, but if you follow the guidelines you should be able to do it without too much difficulty.

Preparations to set the low beam of a Mercedes Classe C 2

Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure precisely.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mercedes Classe C 2

Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe C 2 (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your Mercedes Classe C 2 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Mercedes Classe C 2, please browse our content on this subject.

If you want more guides on the Mercedes Classe C 2, go to our Mercedes Classe C 2 category.