Regardless whether you feel you can’t see properly at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Despite the fact this correction may look easy thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic modification, and in this content, we will see how to adjust the low beam lights of your Mercedes Classe B 3? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Classe B 3.

set-low-beam-headlights-mercedes-classe-b-3

Why adjust the low beam lights of your Mercedes Classe B 3?

So let’s commence our content with the benefit of adjusting the low beam lights of your Mercedes Classe B 3. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and looking at this setting, either because the low beams of your Mercedes Classe B 3 are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Mercedes Classe B 3 for security is a wise decision.

To start, the adjusting of the dipped headlights of an Mercedes Classe B 3 must be done for a simple security purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Mercedes Classe B 3 for law justifications

Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mercedes Classe B 3?

We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Mercedes Classe B 3? This setting may seem to be a bit complex, but if you follow the guidelines you should be able to do it without too much issue.

Preparations to set the low beam of a Mercedes Classe B 3

Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mercedes Classe B 3

Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Classe B 3 (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Mercedes Classe B 3 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Mercedes Classe B 3, please browse our content on this subject.

In the event that you have any further questions about the Mercedes Classe B 3, do not hesitate to consult our Mercedes Classe B 3 category.