Regardless whether you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary modification, and in this content, we will see how to adjust the low beam lights of your Mercedes C class? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes C class.
Why set the low beam lights of your Mercedes C class?
So let’s commence our content with the benefit of adjusting the low beam lights of your Mercedes C class. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your Mercedes C class are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Mercedes C class for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Mercedes C class must be done for a basic safety cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes C class for law reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes C class?
We will now move on to the part that interests you the most in this content, how to adjust the low beams of his Mercedes C class? This setting may seem a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Mercedes C class
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes C class
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes C class (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Mercedes C class is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes C class, please read our content on this subject.
In the event that you have any additional questions about the Mercedes C class, do not hesitate to consult our Mercedes C class category.
