Regardless whether you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Mercedes Benz Sprinter? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Benz Sprinter.
Why adjust the low beam lights of your Mercedes Benz Sprinter?
So let’s begin our article with the interest of adjusting the low beam lights of your Mercedes Benz Sprinter. For the majority of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Mercedes Benz Sprinter are not lighting up well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Mercedes Benz Sprinter for safety is a good option.
First of all, the adjusting of the dipped headlights of an Mercedes Benz Sprinter must be done for a simple safety purpose. Regardless it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Mercedes Benz Sprinter for legal justifications
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Benz Sprinter?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Mercedes Benz Sprinter? This setting may seem to be a bit complicated, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Mercedes Benz Sprinter
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Benz Sprinter
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mercedes Benz Sprinter (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Mercedes Benz Sprinter is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes Benz Sprinter, please go through our article on this subject.
Whenever you have any additional questions about the Mercedes Benz Sprinter, do not hesitate to consult our Mercedes Benz Sprinter category.
