Regardless you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your car to blame – your low beams. Despite the fact this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this article content, we will find out how to adjust the low beam lights of your Mercedes Benz GLS Class? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Benz GLS Class.
Why adjust the low beam lights of your Mercedes Benz GLS Class?
So let’s start our article content with the interest of adjusting the low beam lights of your Mercedes Benz GLS Class. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Mercedes Benz GLS Class are not illuminating well, or because you have the feeling that they are too low or too strong is a good plan .
Adjusting the low beam of your Mercedes Benz GLS Class for safety is a good plan.
To start, the adjusting of the dipped headlights of an Mercedes Benz GLS Class must be done for a ordinary safety reason. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Benz GLS Class for law justifications
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Benz GLS Class?
We will now go forward to the part that concerns you the more in this article content, how to adjust the low beams of his Mercedes Benz GLS Class? This setting may sound a bit difficult, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Mercedes Benz GLS Class
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Benz GLS Class
Once your car is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Benz GLS Class (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Mercedes Benz GLS Class is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mercedes Benz GLS Class, please go through our article content on this subject.
If you have any further questions about the Mercedes Benz GLS Class, do not hesitate to consult our Mercedes Benz GLS Class category.
