Regardless you feel you can’t see as well through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this simple manipulation, and in this article content, we will discover how to adjust the low beam lights of your Mazda MX 5 Miata? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda MX 5 Miata.
Why adjust the low beam lights of your Mazda MX 5 Miata?
So let’s begin our article content with the point of adjusting the low beam lights of your Mazda MX 5 Miata. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Mazda MX 5 Miata are not illuminating well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Mazda MX 5 Miata for safety is a wise decision.
First of all, the adjusting of the dipped headlights of an Mazda MX 5 Miata must be done for a simple safety purpose. Whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mazda MX 5 Miata for legal motives
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mazda MX 5 Miata?
We will now move on to the section that interests you the more in this article content, how to adjust the low beams of his Mazda MX 5 Miata? This setting may appear a bit complicated, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mazda MX 5 Miata
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mazda MX 5 Miata
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mazda MX 5 Miata (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Mazda MX 5 Miata is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mazda MX 5 Miata, please read our article content on this subject.
To find more tips on the Mazda MX 5 Miata, take a look at the Mazda MX 5 Miata category.
