Regardless whether you feel you can’t see good enough through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this correction may look simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this ordinary realignment, and in this article content, we will see how to adjust the low beam lights of your Mazda CX 9? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda CX 9.
Why adjust the low beam lights of your Mazda CX 9?
So let’s commence our article content with the advantage of adjusting the low beam lights of your Mazda CX 9. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Mazda CX 9 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Mazda CX 9 for security is a good option.
Firstly, the adjusting of the dipped headlights of an Mazda CX 9 must be done for a elementary security cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mazda CX 9 for law reasons
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mazda CX 9?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Mazda CX 9? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Mazda CX 9
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mazda CX 9
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mazda CX 9 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Mazda CX 9 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mazda CX 9, please examine our article content on this subject.
To get more tips on the Mazda CX 9, take a look at the Mazda CX 9 category.
