Regardless you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may look simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this ordinary modification, and in this document, we will find out how to adjust the low beam lights of your Mazda CX 30? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda CX 30.

set-low-beam-headlights-mazada-cx-30

Why set the low beam lights of your Mazda CX 30?

So let’s commence our document with the point of adjusting the low beam lights of your Mazda CX 30. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Mazda CX 30 are not illuminating well, or because you have the feeling that they are too low or too strong is a good option .

Adjusting the low beam of your Mazda CX 30 for security is a good option.

To start, the adjusting of the dipped headlights of an Mazda CX 30 must be done for a basic security purpose. Regardless whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Mazda CX 30 for law justifications

Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mazda CX 30?

We will now move on to the section that concerns you the most in this document, how to adjust the low beams of his Mazda CX 30? This setting may sound a bit complicated, but if you stick to the guidelines you should be able to do it without too much issue.

Preparations to set the low beam of a Mazda CX 30

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mazda CX 30

Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mazda CX 30 (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, check that the low beam setting of your Mazda CX 30 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Mazda CX 30, please read our document on this subject.

In the event that you have any additional questions about the Mazda CX 30, do not hesitate to consult our Mazda CX 30 category.