Whether you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple manipulation, and in this article, we will find out how to adjust the low beam lights of your Mazda CX 3? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda CX 3.

set-low-beam-headlights-mazda-cx-3

Why set the low beam lights of your Mazda CX 3?

So let’s begin our article with the interest of adjusting the low beam lights of your Mazda CX 3. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Mazda CX 3 are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .

Adjusting the low beam of your Mazda CX 3 for security is a good idea.

First of all, the adjusting of the dipped headlights of an Mazda CX 3 must be done for a basic security cause. Regardless whether it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Mazda CX 3 for law justifications

In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Mazda CX 3?

We will now go forward to the section that interests you the most in this article, how to adjust the low beams of his Mazda CX 3? This setting may seem a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.

Preparations to set the low beam of a Mazda CX 3

To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Mazda CX 3

Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mazda CX 3 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the low beam setting of your Mazda CX 3 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Mazda CX 3, please go through our article on this subject.

To discover more tips on the Mazda CX 3, take a look at the Mazda CX 3 category.