Regardless you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary realignment, and in this content page, we will find out how to adjust the low beam lights of your Mazda 5? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda 5.
Why adjust the low beam lights of your Mazda 5?
So let’s start our content page with the benefit of adjusting the low beam lights of your Mazda 5. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking out this setting, either because the low beams of your Mazda 5 are not illuminating well, or because you have the sense that they are too low or too powerful is a good option .
Adjusting the low beam of your Mazda 5 for safety is a good option.
First of all, the adjusting of the dipped headlights of an Mazda 5 must be done for a ordinary safety cause. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mazda 5 for law motives
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mazda 5?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Mazda 5? This setting may appear a bit complex, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Mazda 5
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mazda 5
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mazda 5 (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Mazda 5 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mazda 5, please examine our content page on this subject.
In the event that you have any further questions about the Mazda 5, do not hesitate to consult our Mazda 5 category.
