It doesn’t matter if you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this correction may seem to be easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this ordinary manipulation, and in this content page, we will see how to adjust the low beam lights of your Mazda 3? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mazda 3.
Why adjust the low beam lights of your Mazda 3?
So let’s begin our content page with the benefit of adjusting the low beam lights of your Mazda 3. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Mazda 3 are not lighting up well, or because you have the feeling that they are too low or too strong is a wise decision .
Adjusting the low beam of your Mazda 3 for security is a wise decision.
Firstly, the adjusting of the dipped headlights of an Mazda 3 must be done for a simple security purpose. Regardless it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mazda 3 for legal justifications
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mazda 3?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Mazda 3? This setting may appear a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Mazda 3
First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mazda 3
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Mazda 3 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Mazda 3 is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Mazda 3, please read our content page on this subject.
To discover more tips on the Mazda 3, take a look at the Mazda 3 category.
