Regardless you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Although this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this common modification, and in this document, we will discover how to adjust the low beam lights of your Maserati Ghibli? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Maserati Ghibli.


Why set the low beam lights of your Maserati Ghibli?

So let’s begin our document with the advantage of adjusting the low beam lights of your Maserati Ghibli. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Maserati Ghibli are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .

Adjusting the low beam of your Maserati Ghibli for safety is a wise decision.

To start, the adjusting of the dipped headlights of an Maserati Ghibli must be done for a simple safety reason. Whether it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Maserati Ghibli for legal motives

In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Maserati Ghibli?

We will now move on to the part that concerns you the most in this document, how to adjust the low beams of his Maserati Ghibli? This setting may appear a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Maserati Ghibli

Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure rigorously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Maserati Ghibli

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Maserati Ghibli (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your Maserati Ghibli is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Maserati Ghibli, please examine our document on this subject.

To find more tips on the Maserati Ghibli, take a look at the Maserati Ghibli category.