Regardless you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Even though this correction may look simple thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this ordinary manipulation, and in this content, we will discover how to adjust the low beam lights of your Lincoln MKS? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lincoln MKS.
Why adjust the low beam lights of your Lincoln MKS?
So let’s begin our content with the benefit of adjusting the low beam lights of your Lincoln MKS. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not always the case and checking out this setting, either because the low beams of your Lincoln MKS are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Lincoln MKS for safety is a good option.
To start, the adjusting of the dipped headlights of an Lincoln MKS must be done for a basic safety cause. Regardless it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Lincoln MKS for law justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lincoln MKS?
We will now go forward to the section that concerns you the more in this content, how to adjust the low beams of his Lincoln MKS? This setting may appear to be a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Lincoln MKS
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lincoln MKS
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Lincoln MKS (they are generally marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Lincoln MKS is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Lincoln MKS, please examine our content on this subject.
If perhaps you have any further questions about the Lincoln MKS, do not hesitate to consult our Lincoln MKS category.
