Regardless whether you feel you can’t see properly through the night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may seem easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary realignment, and in this content page, we will find out how to adjust the low beam lights of your Lincoln MKC? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lincoln MKC.
Why adjust the low beam lights of your Lincoln MKC?
So let’s start our content page with the advantage of adjusting the low beam lights of your Lincoln MKC. For most people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and checking this setting, either because the low beams of your Lincoln MKC are not lighting up well, or because you have the sense that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Lincoln MKC for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Lincoln MKC must be done for a ordinary safety purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lincoln MKC for law justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lincoln MKC?
We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Lincoln MKC? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Lincoln MKC
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lincoln MKC
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Lincoln MKC (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, examine that the low beam setting of your Lincoln MKC is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Lincoln MKC, please read our content page on this subject.
Whenever you have any additional questions about the Lincoln MKC, do not hesitate to consult our Lincoln MKC category.
