Regardless you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary realignment, and in this article, we will discover how to adjust the low beam lights of your Lexus RX? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lexus RX.

set-low-beam-headlights-lexus-rx

Why set the low beam lights of your Lexus RX?

So let’s commence our article with the interest of adjusting the low beam lights of your Lexus RX. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Lexus RX are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Lexus RX for security is a wise decision.

To begin, the adjusting of the dipped headlights of an Lexus RX must be done for a basic security reason. Whether it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Lexus RX for legal justifications

Furthermore to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Lexus RX?

We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Lexus RX? This setting may sound a bit difficult, but if you stick to the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Lexus RX

To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Lexus RX

Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Lexus RX (they are usually marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, examine that the low beam setting of your Lexus RX is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Lexus RX, please examine our article on this subject.

If you wish more guides on the Lexus RX, go to our Lexus RX category.