Regardless whether you feel you can’t see properly through the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary manipulation, and in this content, we will discover how to adjust the low beam lights of your Lexus ES? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lexus ES.
Why adjust the low beam lights of your Lexus ES?
So let’s start our content with the benefit of adjusting the low beam lights of your Lexus ES. For a lot of people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Lexus ES are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Lexus ES for safety is a good option.
Firstly, the adjusting of the dipped headlights of an Lexus ES must be done for a simple safety purpose. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lexus ES for law justifications
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lexus ES?
We will now go forward to the part that interests you the more in this content, how to adjust the low beams of his Lexus ES? This setting may appear to be a bit complex, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Lexus ES
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lexus ES
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Lexus ES (they are almost always marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Lexus ES is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Lexus ES, please examine our content on this subject.
If you wish more guides on the Lexus ES, go to our Lexus ES category.
