Regardless you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this ordinary manipulation, and in this content page, we will discover how to adjust the low beam lights of your Land Rover LR4? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Land Rover LR4.

set-low-beam-headlights-land-rover-lr4

Why adjust the low beam lights of your Land Rover LR4?

So let’s commence our content page with the interest of adjusting the low beam lights of your Land Rover LR4. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not always the case and examining this setting, either because the low beams of your Land Rover LR4 are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .

Adjusting the low beam of your Land Rover LR4 for security is a wise decision.

To start, the adjusting of the dipped headlights of an Land Rover LR4 must be done for a simple security purpose. Regardless whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Land Rover LR4 for law justifications

Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Land Rover LR4?

We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Land Rover LR4? This setting may sound a bit complicated, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Land Rover LR4

To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Land Rover LR4

Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Land Rover LR4 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Land Rover LR4 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Land Rover LR4, please browse our content page on this subject.

To find more tips on the Land Rover LR4, take a look at the Land Rover LR4 category.