Whether you feel you can’t see good enough at night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common realignment, and in this content page, we will see how to adjust the low beam lights of your Land Rover Discovery Sport? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Land Rover Discovery Sport.
Why adjust the low beam lights of your Land Rover Discovery Sport?
So let’s commence our content page with the advantage of adjusting the low beam lights of your Land Rover Discovery Sport. For a lot of people these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Land Rover Discovery Sport are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Land Rover Discovery Sport for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Land Rover Discovery Sport must be done for a elementary security reason. Regardless whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Land Rover Discovery Sport for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Land Rover Discovery Sport?
We will now go forward to the part that interests you the most in this content page, how to adjust the low beams of his Land Rover Discovery Sport? This setting may sound a bit difficult, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Land Rover Discovery Sport
To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Land Rover Discovery Sport
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Land Rover Discovery Sport (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Land Rover Discovery Sport is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Land Rover Discovery Sport, please read our content page on this subject.
To discover more tips on the Land Rover Discovery Sport, take a look at the Land Rover Discovery Sport category.
