Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Despite the fact this adjustment may seem to be easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this content page, we will find out how to adjust the low beam lights of your Land Rover Defender? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Land Rover Defender.
Why adjust the low beam lights of your Land Rover Defender?
So let’s begin our content page with the point of adjusting the low beam lights of your Land Rover Defender. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Land Rover Defender are not illuminating well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Land Rover Defender for safety is a wise decision.
Firstly, the adjusting of the dipped headlights of an Land Rover Defender must be done for a ordinary safety purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Land Rover Defender for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Land Rover Defender?
We will now move on to the part that concerns you the most in this content page, how to adjust the low beams of his Land Rover Defender? This setting may appear to be a bit complex, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Land Rover Defender
Firstly, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Land Rover Defender
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Land Rover Defender (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Land Rover Defender is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Land Rover Defender, please go through our content page on this subject.
If you wish more tutorials on the Land Rover Defender, go to our Land Rover Defender category.
