Whether you feel you can’t see properly through the night, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this common modification, and in this article, we will find out how to adjust the low beam lights of your Lancia Ypsilon? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lancia Ypsilon.
Why adjust the low beam lights of your Lancia Ypsilon?
So let’s begin our article with the interest of adjusting the low beam lights of your Lancia Ypsilon. For the majority of us these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Lancia Ypsilon are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Lancia Ypsilon for safety is a good option.
First of all, the adjusting of the dipped headlights of an Lancia Ypsilon must be done for a elementary safety purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lancia Ypsilon for law justifications
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lancia Ypsilon?
We will now move on to the section that concerns you the more in this article, how to adjust the low beams of his Lancia Ypsilon? This setting may appear a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Lancia Ypsilon
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lancia Ypsilon
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Lancia Ypsilon (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Lancia Ypsilon is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Lancia Ypsilon, please examine our article on this subject.
If you need more guides on the Lancia Ypsilon, go to our Lancia Ypsilon category.
