Regardless whether you feel you can’t see good enough during the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this common modification, and in this article, we will see how to adjust the low beam lights of your Kia Xceed? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Xceed.

set-low-beam-headlights-kia-xceed

Why set the low beam lights of your Kia Xceed?

So let’s start our article with the point of adjusting the low beam lights of your Kia Xceed. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and examining this setting, either because the low beams of your Kia Xceed are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good plan .

Adjusting the low beam of your Kia Xceed for safety is a good plan.

Firstly, the adjusting of the dipped headlights of an Kia Xceed must be done for a ordinary safety reason. Regardless it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence important for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Kia Xceed for law reasons

In addition to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Kia Xceed?

We will now move on to the part that concerns you the most in this article, how to adjust the low beams of his Kia Xceed? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much issue.

Preparations to set the low beam of a Kia Xceed

To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Kia Xceed

Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the guidelines to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Kia Xceed (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your Kia Xceed is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Kia Xceed, please go through our article on this subject.

If you want more guides on the Kia Xceed, go to our Kia Xceed category.