Whether you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this common manipulation, and in this article content, we will find out how to adjust the low beam lights of your Kia Sedona? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Sedona.
Why set the low beam lights of your Kia Sedona?
So let’s start our article content with the interest of adjusting the low beam lights of your Kia Sedona. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Kia Sedona are not illuminating well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Kia Sedona for security is a good idea.
Firstly, the adjusting of the dipped headlights of an Kia Sedona must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Sedona for law justifications
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Sedona?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Kia Sedona? This setting may appear to be a bit difficult, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Kia Sedona
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Sedona
Once your car is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Kia Sedona (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Kia Sedona is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Kia Sedona, please browse our article content on this subject.
Whenever you have any further questions about the Kia Sedona, do not hesitate to consult our Kia Sedona category.
