Regardless you feel you can’t see as well through the night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this basic modification, and in this article content, we will see how to adjust the low beam lights of your Kia Forte? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Forte.
Why adjust the low beam lights of your Kia Forte?
So let’s start our article content with the point of adjusting the low beam lights of your Kia Forte. For many people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking out this setting, either because the low beams of your Kia Forte are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Kia Forte for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Kia Forte must be done for a simple safety cause. Whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Forte for law reasons
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Forte?
We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Kia Forte? This setting may appear to be a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Kia Forte
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Forte
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Kia Forte (they are in most cases marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Kia Forte is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Kia Forte, please examine our article content on this subject.
In the event that you have any further questions about the Kia Forte, do not hesitate to consult our Kia Forte category.
