Regardless you feel you can’t see properly through the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple realignment, and in this content, we will see how to adjust the low beam lights of your Kia Cee D? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Cee D.
Why set the low beam lights of your Kia Cee D?
So let’s begin our content with the interest of adjusting the low beam lights of your Kia Cee D. For many people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Kia Cee D are not lighting up well, or because you have the sense that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Kia Cee D for safety is a wise decision.
To start, the adjusting of the dipped headlights of an Kia Cee D must be done for a simple safety reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Cee D for legal justifications
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Cee D?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Kia Cee D? This setting may appear a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Kia Cee D
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Cee D
Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Kia Cee D (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Kia Cee D is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Kia Cee D, please go through our content on this subject.
If you wish more guides on the Kia Cee D, go to our Kia Cee D category.
