Whether you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more technical than this basic modification, and in this article content, we will find out how to adjust the low beam lights of your Kia Carens? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Carens.
Why set the low beam lights of your Kia Carens?
So let’s begin our article content with the point of adjusting the low beam lights of your Kia Carens. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Kia Carens are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Kia Carens for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Kia Carens must be done for a ordinary security cause. Regardless it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Carens for legal motives
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Carens?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his Kia Carens? This setting may seem a bit difficult, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Kia Carens
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Carens
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Kia Carens (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Kia Carens is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Kia Carens, please read our article content on this subject.
To get more tips on the Kia Carens, take a look at the Kia Carens category.
