It doesn’t matter if you feel you can’t see good enough at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Even though this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more complex than this basic modification, and in this article content, we will discover how to adjust the low beam lights of your Jeep Patriot? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Jeep Patriot.
Why adjust the low beam lights of your Jeep Patriot?
So let’s start our article content with the point of adjusting the low beam lights of your Jeep Patriot. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Jeep Patriot are not lighting up well, or because you have the sense that they are too weak or too powerful is a good idea .
Adjusting the low beam of your Jeep Patriot for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Jeep Patriot must be done for a basic safety cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Jeep Patriot for legal motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Jeep Patriot?
We will now go forward to the section that interests you the most in this article content, how to adjust the low beams of his Jeep Patriot? This setting may appear a bit difficult, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Jeep Patriot
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Jeep Patriot
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Jeep Patriot (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Jeep Patriot is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Jeep Patriot, please go through our article content on this subject.
Whenever you have any further questions about the Jeep Patriot, do not hesitate to consult our Jeep Patriot category.
