Whether you feel you can’t see properly at night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Although this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Jeep Liberty? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Jeep Liberty.
Why set the low beam lights of your Jeep Liberty?
So let’s start our article with the interest of adjusting the low beam lights of your Jeep Liberty. For most people these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Jeep Liberty are not lighting up well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Jeep Liberty for safety is a good idea.
Firstly, the adjusting of the dipped headlights of an Jeep Liberty must be done for a simple safety purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the flip side, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Jeep Liberty for law motives
Furthermore to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Jeep Liberty?
We will now go forward to the section that interests you the more in this article, how to adjust the low beams of his Jeep Liberty? This setting may sound a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Jeep Liberty
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Jeep Liberty
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Jeep Liberty (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Jeep Liberty is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Jeep Liberty, please examine our article on this subject.
If you wish more tutorials on the Jeep Liberty, go to our Jeep Liberty category.
