Regardless whether you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a full correction is much more complex than this basic modification, and in this content page, we will find out how to adjust the low beam lights of your Jaguar F-Type? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Jaguar F-Type.
Why set the low beam lights of your Jaguar F-Type?
So let’s start our content page with the advantage of adjusting the low beam lights of your Jaguar F-Type. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and looking at this setting, either because the low beams of your Jaguar F-Type are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Jaguar F-Type for safety is a good idea.
To begin, the adjusting of the dipped headlights of an Jaguar F-Type must be done for a ordinary safety reason. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is as a consequence necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Jaguar F-Type for law motives
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Jaguar F-Type?
We will now go forward to the section that concerns you the most in this content page, how to adjust the low beams of his Jaguar F-Type? This setting may seem a bit complex, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Jaguar F-Type
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Jaguar F-Type
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Jaguar F-Type (they are generally marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Jaguar F-Type is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Jaguar F-Type, please read our content page on this subject.
Whenever you have any further questions about the Jaguar F-Type, do not hesitate to consult our Jaguar F-Type category.
