Regardless you feel you can’t see properly during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Although this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common realignment, and in this article, we will find out how to adjust the low beam lights of your Jaguar F-Pace? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Jaguar F-Pace.
Why adjust the low beam lights of your Jaguar F-Pace?
So let’s start our article with the interest of adjusting the low beam lights of your Jaguar F-Pace. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not always the case and looking at this setting, either because the low beams of your Jaguar F-Pace are not illuminating well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Jaguar F-Pace for safety is a good option.
First of all, the adjusting of the dipped headlights of an Jaguar F-Pace must be done for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Jaguar F-Pace for law reasons
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Jaguar F-Pace?
We will now go forward to the section that concerns you the most in this article, how to adjust the low beams of his Jaguar F-Pace? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Jaguar F-Pace
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Jaguar F-Pace
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Jaguar F-Pace (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Jaguar F-Pace is consistent on the road, do not be reluctant to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Jaguar F-Pace, please read our article on this subject.
To get more tips on the Jaguar F-Pace, take a look at the Jaguar F-Pace category.
